Fits a large number of consumer, municipality & landscape tractors
Allowing you to utilize your Cat I toplink & lift Arm 5/8" connection
540 RPM is standard Cat I PTO Speed
Maximum torque load that can be applied to the output shaft for continuous operation in ideal conditions. The service life may be compromised if the load exceeds this rate.
Heavy Duty Gearbox
Cast iron gearbox 540 rpm with free wheel for added strength
Knife Tip Speed
This provides for a clean cut
Offset allows you to closer to buildings, fence lines, trees and other things you are trying to get around while mowing.
Reversible "Y" Blades with precise blade overlap which is important to achieve an even cutting result
Optional Mulching Blades
Allows you to cut & mulchlight material up to 1"
With Mulching blades
0 - 6
Variable heights allow you to set correct height for your application
Resist denting & wear
Side Plate Thickness
Provides structural support
Reinforced Lift Point
Allowing you to lift Mower without implement being attached to your tractor
Rotor Shaft Diameter
Large diameter protects against obstructions
Reverse Rotor Rotation
Shaft rotation is forward. The knives cut down and back, picking up the bent over grass, pulling in the tall grass & weeds, cutting & shredding the material & discharging it to the rear
Balanced Rotor & Shaft
Increases the bearing life, minimizes vibrations, audible noise, power losses and finally it results in increased quality of product
To prevent material from being thrown out from under the deck
Replaceable; protects sides of the mowers
Adjustable Rear Panel
Allows for easy inspection, cleaning, blade changing, and maintenance of your machine. The rear gate can also be left open for easier discharge in heavy conditions, or you can close the gate to greater mulching.
No. of Belts
Multiple belts ensure a positive transfer of power to your flail mowers blades
Loosen or tighten a few bolts to apply tension, loosen or change the belts
3-Pt Cat I Connection Width
Allows for easy connection to your tractor 20 HP to 45 HP
Series 4 1-3/8" SPL w/ QD x 1-3/8 SPL w/ Shear Bolt
The shear bolt protects the auger from damage if the auger becomes plugged or subjected to high loads. It is important to used the correct replacement bolt of proper size & strength to ensure that the shear device will function properly.
Great for ease of maintenance and availability should you need to replace the bearings
SAE 80W - 90 Gear Oil
Parts available through Betst Products Parts Department
We Are Betst Products Supplying North Americawith Quality Implements at Reasonable Price'sSince 1995 Parts & Customer Support Available at Support@betstco.comToll Free 1-877-876-7895
Order it Today ~ Have it in a Week
Includes SHIPPING Thru FedEx Freight - LOWER 48 STATES - BUSINESS OR RESIDENCE
$45 LIFT GATE Fee if needed during Unloading, see Shipping Options
37” Flail Mower EF95 Cat.1 3pt 15HP+ Rating
Standard 3Pt. Category 1 hitch mount. Designed for 15HP+ Rated Tractors
This flail mower is designed for cutting grass, cover crops, swap to the Hammer/Mulching Blades and it is great for mulching tree prunings and roadside applications
Comes with Reversible Y blades with Precise blade overlap
Comes with Standard 6~Spline 32” PTO Shaft w/ Shear Bolt
Change to Hammer/Mulching Blades and this is great for use in Orchards and Vineyards
Check our eBay store for Hammer/Mulching Blade Options
Powder Coat Paint Finish
Some assembly required (1/2 hr.) Attaching Upper 3 Pt. Bracket with Nuts & Bolts, checking all nut and bolts for tightness, greasing, adding 80-90 Gear Oil, Your Ready To Go!
Purchase Includes 2 Year Warranty
2 Year Extended Warranty Coverage Availablefor a Total of 4 Years for $100 more paidat time of purchase
CALL FOR SHIPPING QUOTE TO HAWAII OR CANADA
VALUE LEADER IMPLEMENT's come with a 2 YEAR WARRANTY
There is also a 2 Year Warranty Extension Available at the time of purchase for a total of 4 years.
We try to keep the warranty process simple, you need your machine to work.
Most warranty Claims are resolved within 48 hours, normaly we just need pictures of the parts that have broken and a breif description of what was going on when it happened. Some parts are requested to be returned to us for inspection.
This is a Manufacture Warranty Supported by Betst Products, llc.
We provide support by phone or email during diagnostics, parts ordering, and parts replacement when neccessary.
We try to stock all parts all the time, sometimes parts do run out, but we have orders being delivered every week, so if we run out you will not be waiting long for a part & Air Shipping is always available.
We inspect all products before they are shipped, this way we catch most problems before the ship to you.
Consumable & Expendable Items (Rubber & Plastic Parts, Hydraulic Hoses, Belts, Tires, Cables, Blades, Tines, Wedges, Teeth, Tips, Chains, and Pins) are covered under this warranty for a period of 90 days against breakage due to defect under normal use.
Hydraulic Cylinders, Pumps, Control Vales along with PTO drive shafts and Gear Boxes are covered under this warranty for a period of 365 days against breakage due to defect under normal use.
FOR A COMPLETE COPY OF WARRANTY POLICY & REGISTRATION, PLEASE REQUEST BY EMAIL OR PHONE AT 1-877-876-7895