68” Flail Mower FH-EFG175

$1,659.00 $1,493.00
(You save $166.00)
(No reviews yet) Write a Review
SKU:
FH-EFG175
Availability:
Usually Ships in 1 -2 Business Days
Weight:
760.00 LBS
Shipping:
Free Shipping
68” Flail Mower FH-EFG175

Farmer-Helper EFG175

Working Width
68"
Good for many applications
Overall Width
75"
Good for many applications
Min. HP Req
28 HP
Compatible with most compact tractors
Hitch
Cat I
Allowing you to utilize your Cat I toplink & lift Arm 5/8" connection or your Cat II 3/4" top link
PTO Speed
540 RPM is standard Cat I PTO Speed
Gearbox Rating
45 HP
Maximum torque load that can be applied to the output shaft for continuous operation in ideal conditions. The service life may be compromised if the load exceeds this rate.
Heavy Duty Gearbox
Standard
Cast iron gearbox 540 rpm with free wheel for added strength
Knife Tip Speed
8,858 fpm
This provides for a clean cut
Distance Right of Center Mount
43.5" or 47.75"
3-Point Hitch may be attached in two positions allowing you to change mowers right offset when looking at the mower from operators seat
Grass Blades
56 Blades
Reversible "Y" Blades with precise blade overlap which is important to achieve an even cutting result
Optional Hammer Blades
28 Hammer
Allows you to cut & mulch wooded material up to 2"
Cutting Capacity
2" Diameter
With Hammer blades
Optional Mulching Blades
28 Mulching
Great for maintaining grassy areas or mulching small twigs
Cutting Height
0 - 6
Variable heights allow you to set correct height for your application
Housing Thickness
Reinforced 8 Guage
Resist; denting & wear
Side Plate Thickness
1/4"/7 mm
Provides structural support
Reinforced Lift Point
Standard
Allowing you to lift Mower without implement being attached to your tractor
Roller Diameter
4"
Utilized to adjust cutting height, greasable bearings and rounded at the edges to prevent gouging during turns with mud scraper for positive height control
Rotor Shaft Diameter
4 1/2
Allows you to cut & mulch wooded material up to 2"
Reverse Rotor Rotation
Standard
Shaft rotation is forward. The knives cut down and back, picking up the bent over grass, pulling in the tall grass & weeds, cutting & shredding the material & discharging it to the rear
Blade Swing
14"
Large swing so that the blades build the required force needed for cutting
Balanced Rotor & Shaft
Standard
Increases the bearing life, minimizes vibrations, audible noise, power losses and finally it results in increased quality of product
Front Flappers
Standard
To prevent material from being thrown out from under the deck
Side Skids
Standard
Replaceable; protects sides of the mowers
Adjustable Rear Panel
Standard
Allows for easy inspection, cleaning, blade changing, and maintenance of your machine. The rear gate can also be left open for easier discharge in heavy conditions, or you can close the gate to greater mulching.
No. of Belts
3
Multiple belts ensure a positive transfer of power to your flail mowers blades
Belt Adjustment
Standard
Loosen or tighten a few bolts to apply tension, loosen or change the belts
3-Pt Cat I Connection Width
26"
Allows for easy connection to your tractor 20 HP to 45 HP
Driveline Type
Series 4 Quick Connect, Shear Bolt Std. 6-Spline
The shear bolt protects the auger from damage if the auger becomes plugged or subjected to high loads. It is important to used the correct replacement bolt of proper size & strength to ensure that the shear device will function properly.
Bearings
Standard/Greasable
Great for ease of maintenance and availability should you need to replace the bearings
Gearbox Lubracation/Capacity
1 Quart
SAE 80W - 90 Gear Oil
Warranty
2 Year
Parts available through Betst Products Parts Department
Weight
726 lbs
Crated Weight
756 lbs
We Are Betst Products Supplying North America with Quality Implements at Reasonable Price's
Since 1995 Parts & Customer Support Available at Support@betstco.com Toll Free 1-877-876-7895

Includes SHIPPING Thru FedEx Freight - LOWER 48 STATES - BUSINESS OR RESIDENCE

 $45 LIFT GATE Fee if needed during Unloading, see Shipping Options 

Value Leader Cat1 - 3PT 68” Flail Mower EFG-175

  • Standard 3Pt. Category 1 hitch mount. Designed for 28HP+ Rated Tractors
  • This flail mower is designed for cutting grass, cover crops, with optional Hammer Blades it is great for mulching tree prunings and roadside applications
  • Comes with Reversible Grass Y blades with Precise blade overlap
  • Adjustable finished cutting height (both Rear Roller & Skids)
  • Balanced Rotor and Shaft
  • INCLUDES Standard 6 Spline 32” 540rpm PTO Shaft w/ Shear Bolt
  • Change to Hammer/Mulching Blades and this is great for use in Orchards and Vineyards
  • Check our store for Hammer/Mulching Blade Options to Pulverize up to 2" Material
  • Powder Coat Paint Finish
  • 2 YEAR WARRANTY 
  • Some assembly required (1/2 hr.) Attaching Upper 3 Pt. Bracket with Nuts & Bolts, checking all nut and bolts for tightness, greasing, adding 80-90 Gear Oil, Your Ready To Go!

Purchase Includes 2 Year Warranty

2 Year Extended Warranty Coverage Available for a Total of 4 Years for $100 more paid at time of purchase

CALL FOR SHIPPING QUOTE TO HAWAII OR CANADA

VALUE LEADER IMPLEMENT's come with a 2 YEAR WARRANTY There is also a 2 Year Warranty Extension Available at the time of purchase for a total of 4 years. We try to keep the warranty process simple, you need your machine to work. Most warranty Claims are resolved within 48 hours, normaly we just need pictures of the parts that have broken and a breif description of what was going on when it happened. Some parts are requested to be returned to us for inspection. This is a Manufacture Warranty Supported by Betst Products, llc. We provide support by phone or email during diagnostics, parts ordering, and parts replacement when neccessary. We try to stock all parts all the time, sometimes parts do run out, but we have orders being delivered every week, so if we run out you will not be waiting long for a part & Air Shipping is always available. We inspect all products before they are shipped, this way we catch most problems before the ship to you. Consumable & Expendable Items (Rubber & Plastic Parts, Hydraulic Hoses, Belts, Tires, Cables, Blades, Tines, Wedges, Teeth, Tips, Chains, and Pins) are covered under this warranty for a period of 90 days against breakage due to defect under normal use. Hydraulic Cylinders, Pumps, Control Vales along with PTO drive shafts and Gear Boxes are covered under this warranty for a period of 365 days against breakage due to defect under normal use. FOR A COMPLETE COPY OF WARRANTY POLICY & REGISTRATION, PLEASE REQUEST BY EMAIL OR PHONE AT 1-877-876-7895

Videos Hide Videos Show Videos

Facebook | Twitter | Youtube | Instagram