The Farmer-Helper finishing mowers allow mowing close to shrubs and building for faster yard maintenance. Either side may be used for close trimming, which is a feature that is not available on side discharge systems. The rear discharge gives you an advantage for eliminating grass buildup in uncut areas; it also reduces blade wear and fuel costs.
The medium lift blades lift the grass and cut it cleanly. It then discharges the cut grass evenly to the rear of the mower path. The full width discharge throat provides an almost unobstructed flow of cut material. The chain guard allows the grass to be safely and smoothly discharged while providing protection from objects being thrown.
- Standard category-I 3-Pt. Hitch Mount
- Floating 3-pt systems allow mower to closely follow ground contours resulting in a quality cut
- This full length rear discharge finish (grooming) mower is designed for homeowners, camps, parks or anyone that needs to maintain lawn & turf surfaces.
- The open rear discharge cutting deck provides quality cut and clipping distribution when grass is cut on a frequent basis and ground conditions are not wet.
- Blade spindles and hubs are heavy duty cast iron and greaseable
- Rear damper system to prevent piling and clumps
- Heavy duty all steel reinforced deck (frame-over-deck design)
- Turf friendly 3” x 8” Solid rubber wheels with a greaseable hubs
- Top access to grease points
|Min. HP Req.||15 HP||15 HP||15 HP|
|Hitch||Cat I||Cat I||Cat I|
|Gear Box Rating||45 HP||45 HP||45 HP|
|Discharge||Full Length Rear||Full Length Rear||Full Length Rear|
|Blade - Qty - Size & Lift Type||3 Qty - 16” Hardened Steel Medium Lift||3 Qty - 20” Hardened Steel Medium Lift||3 Qty - 24” Hardened Steel Medium Lift|
|Blade Tip Speed||13,488 FPM||17,985 FPM||21,582 FPM|
|Cutting Height||1” - 3”||1” - 3”||1” - 3”|
|Roller Bearing Blade Spindle||2 3/4” Housing w/ 1-1/4” Spindle||2 3/4” Housing w/ 1-1/4” Spindle||2 3/4” Housing w/ 1-1/4” Spindle|
|Caster Gauge Wheels||3” X 8”||3” X 8”||3” X 8”|
|Caster Wheel Spindle Size/Type||Sealed Bearing with 1” Spindle||Sealed Bearing with 1” Spindle||Sealed Bearing with 1” Spindle|
|Top Link Type||Floating||Floating||Floating|
|Lower Link Type||Fixed||Fixed||Fixed|
|Belt System||Tensioned Belt Drive System||Tensioned Belt Drive System||Tensioned Belt Drive System|
|No. of Belts||2||2||2|
|Driveline Type||Series 4, 1 3/8” 6-Splinew/ Shear Bolt||Series 4, 1 3/8” 6-Splinew/ Shear Bolt||Series 4, 1 3/8” 6-Splinew/ Shear Bolt|
|Weight||445 lbs||478 lbs||524 lbs|
|Crated Weight||485 lbs||518 lbs||562 lbs|