Wood Chipper 4" Material (BX42)

$1,399.00 $1,287.00
(You save $112.00)
(7 reviews) Write a Review
SKU:
FH- BX42
Availability:
Ships within one business day of order. Normal arrival is withing a week anywhere in the USA
Weight:
435.00 LBS
Minimum Purchase:
1 unit
Maximum Purchase:
2 units
Shipping:
Free Shipping
Wood Chipper 4" Material (BX42)

Farmer-Helper BX-42 Chipper 

Shown with optional stand (not included unless purchased)We're currently out of the stand

Maximum Feed Capacity
4" x 10" Material
Largest size material that should be fed into the chipper for safe and proper operation.
Minimum, Operation PTO HP
15 HP (4" diameter)
Lowest PTO Operating speed necessary to operate chipper.
Maximum Capacity PTO HP
26 HP
Maximum PTO Operating speed necessary to operate chipper at maximum feed capacity.
Tractor HP Range
15 - 50 HP
Fits a large number consumer, municipality & landscape tractors.
Feed Design
Self Feed/Pinch & Pull
The self-feed hopper is designed to angle the brush against the rotor and blades, pulling the branches into the chipper. Making it easier to feed.
Size with Hopper Folded
40" L X 42" W X 60" H
Great for storage
Feed Hopper
20" X 20" Hinged
Easier & less time - consuming to put branches into a larger hopper.
Flywheel
Standard
25" Diameter
Flywheel Weight
115 lbs. - 1/2" Thick w/Extractor Wings
The heavier the flywheel, the more potential energy it holds, the less engine power it takes to keep it turning. The heavier flywheel uses less energy (gas) and chips those tougher limbs more easily.
Cutting Blades
4 Reversible
Reversible and sharpenable to extend the life of your blades.
Bed Blades
1 Reversible
Reversible and sharpenable to extend the life of your blades.
Twig Breaker Blower Paddles
Standard
Behind blades are blower paddles with integrated twig breakers designed for greater output force and smaller chips exiting the machine.
Discharge Chute
300"
Allows you to control where you want the chips. The chute swivels 300 degrees (facing operator blocked)
Discharge Height
60"
Top deflector adjusts the distance
Air Vents
Standard
Air enters through the vents and powers the chips out the chute up to 20ft. This allows you to direct chips where you want them.
Drive
Direct
Driven directly by PTO
PTO Drive Line
04 Series 30" included w/Shear pin
Designed as a safeguard to break to protect implement once force is applied.
Hitch Type
Cat I
Allows for easy connection to a wide range of Cat I hitch tractors 20 HP to 50 HP
PTO Operating Speed
540 RPM
Standard Cat I PTO Speed
3-Pt Connection Width
19 3/4" - 27 1/2"
Allows for easy connection to your tractor's Cat I hitch
Net Weight
430 lbs
 
Shipping Weight
450 lbs
 
Warranty
2 Years
Parts available to Betstco Parts Department

4" Gravity Feed Wood Chipper (BX42)

Cat.I 3Pt. 16HP+ 

Order it Today ~ Have it in a Week

Includes FREE SHIPPING Thru FedEx Freight

- LOWER 48 STATES

- BUSINESS OR RESIDENCE 

- $45 LIFT GATE Fee if needed during Unloading, see Shipping Options

Purchase Includes 2 Year Warranty

2 Year Extended Warranty Coverage Available for a Total of 4 Years for $100 more paid at time of purchase CALL FOR SHIPPING QUOTE TO Alaska, HAWAII OR CANADA

SALES DEPT 1-877-876-7895

 chipper-3-pt-self-feed-fh-bx42.jpg

Betstco IMPLEMENT's come with a 2 YEAR WARRANTY There is also a 2 Year Warranty Extension Available at the time of purchase for a total of 4 years. We try to keep the warranty process simple, you need your machine to work. Most warranty Claims are resolved within 48 hours, normaly we just need pictures of the parts that have broken and a breif description of what was going on when it happened. Some parts are requested to be returned to us for inspection. This is a Manufacture Warranty Supported by Betst Products, llc. We provide support by phone or email during diagnostics, parts ordering, and parts replacement when neccessary. We try to stock all parts all the time, sometimes parts do run out, but we have orders being delivered every week, so if we run out you will not be waiting long for a part & Air Shipping is always available. We inspect all products before they are shipped, this way we catch most problems before the ship to you. Consumable & Expendable Items (Rubber & Plastic Parts, Hydraulic Hoses, Belts, Tires, Cables, Blades, Tines, Wedges, Teeth, Tips, Chains, and Pins) are covered under this warranty for a period of 90 days against breakage due to defect under normal use. Hydraulic Cylinders, Pumps, Control Vales along with PTO drive shafts and Gear Boxes are covered under this warranty for a period of 365 days against breakage due to defect under normal use. FOR A COMPLETE COPY OF WARRANTY POLICY & REGISTRATION, PLEASE REQUEST BY EMAIL OR PHONE AT 1-877-876-7895

7 Reviews Hide Reviews Show Reviews

  • 5
    Fine piece of equipment

    Posted by Edwin Layne Miears on 08 05 2016

    This BX is a great item. Arrived as promised and packed well. all parts were included for assembly. Already chipped for about an hour and it works great. No complaints!

  • 5
    Works Great

    Posted by Unknown on 04 18 2016

    I have it hooked up to a Massey Ferguson sub compact 23hp tractor and it worked really well. The gravity feed works pretty well and chipped everything I put in it. Small brush doesn't self feed as well but all you have to do it feed more larger branches in behind and it pulls everything in.

  • 5
    well built

    Posted by Unknown on 01 27 2016

    great price for and excellent chipper.

  • 4
    solid made piece of machinery,

    Posted by Ron Larson on 06 11 2015

    Attached to a 1939 9-n Ford tractor, which has plenty of power, I'm well pleased with the chipper. Would recommend to anyone needing a chipper.

  • 5
    much better than a woodmaxx love the bx-42

    Posted by Unknown on 05 15 2015

    Service is fantastic got my chipper in five days and have used it every day since no troubles

  • 5
    BX42 Woodchipper.

    Posted by Jon Crooker. on 04 27 2015

    I have a 16 hp Tractor and I have been very happy with how well the Chipper has been working with it .
    We have used it for a total of 8 working hours over the last two weekends . @

  • 4
    Good bang for the buck

    Posted by Garth Gibbs on 04 08 2015

    Good value, fast shipping, easy assembly.
    During assembly I got an appreciation for the manufacturing value, looks like the right amount of steel in the critical areas, easy to maintain and service. Should be around or a long time. Takes on everything I can throw at it!

Facebook | Twitter | Youtube | Instagram